Skyzone SKY03 Goggles FPV Glasses With 3D Camera For RC Racing Drone Quadcopter
Production List: 1* FPV Goggles 1* Carry case 1* Futaba date cable 1* JR date cable 2* 5.8G Antenna 1* AV cable 1* power cable Operational Guidance The two 5.8GHz wireless receiver modules, the two independently workable display modules and the new DVR system used to support the 2D & 3D display modes are built in the SKY03 FPV goggles. The wireless receiver system can work in the diversity receiver mode to improve the receiving effect. In this mode, the channel and band settings for wireless receiver can be compatible with most of the conventional ISM 5.8GHz transmitters, in order to support the 6 bands and the 48 channels (for detailed bands and channels, see the specification). The matching 3D camera SCAM303 and the conventional 5.8G transmitter can be put into use in the 3D mode. The two lenses of the 3D camera can be set for shot by means of the parallel method. When the camera is set for a certain close shot, the third dimension will be enhanced effectively. When the camera is set for a long-distance shot, the third dimension will be weakened, but the more vivid visual experiences will be presented as a whole. The new DVR system can not only further enhance the quality of analog video recording, but also can make use of the high-quality H.246 video compression technology to better restore the video screen, save the more storage space, support the 128GB high-capacity UHS-I memory card, and support the automatic video recording function. For details, see the description of the “Video” section. Quickstart Preparation · Install the lenses, goggles, antennas and memory cards for the FPV goggles. · Connect the SCAM303 camera to the transmitter, and turn on the power; set the working channel according to the transmitter instructions; switch on the power for the SKY03 FPV goggles; long press the power button for 3 seconds to turn on the machine (and then long press the power button for 3 seconds again to turn off the machine). · Short press the <BAND and CH> buttons to adjust the channel and keep consistent with the transmitter to watch the picture taken by the camera. · Slide the IPD adjuster to adjust the interpupillary distance. Channel Search · Button Function · Long press the <CH Search > button to pop up the channel search menu. 3 · Short press the <CH Search> button to perform the channel search (repeatedly). The search function is performed from low to high according to the frequency. After searching for 48 channels, the camera will automatically work on one channel with the strongest signal. The signal strength of the channels is shown in the histogram. Please press the LEFT or RIGHT Button to manually select the channels. The band, the channel and the signal strength corresponding to the location of the triangle indicator will be updated in real time. · When exiting the search menu, the camera will work on the channel where the triangle indicator is located. RF Racing · The <RF Racing> mode is specially set for the game. In this mode, the camera can work only on the eight channels of the R band. The regulating channels of <CH> button will be increased, while the regulating channels of <BAND> button will be decreased. The channel search function can be only used to scan the eight channels of the R band. 3D Display · The Side-by-Side (half) 3D display can be supported in the RF, AV IN, HDMI IN and PLAYBACK modes. · The Side-by-Side (half) 3D video format can be converted only when the two images are arranged on the left and right of the same screen. Meanwhile, long press the <MODE> key to open the 3D display function. The 3D icon will be displayed on the screen. · The Top-and-Bottom 3D and other 3D formats cannot be supported. · It may be required to adjust the IPD to achieve the optimal display effects. · The icon can be displayed in the 2D mode by default after starting up each time. Button Function (for the button function of playback mode, see the description of “Playback” part). TRACK Button: · Short press the button in the normal mode to activate the Head Tracker reset function. · Long press the MENU button for 3 seconds to enter into the menu setting status. · Press the button to switch between the four main menus in the MENU status. CH Button: · In the RF mode, short press the channel button to adjust the channel in cycles. · In the RF, AV IN, HDMI IN and PLAYBACK modes, long press the button for 3 seconds to adjust the volume upwards. · Press the button in the MENU status to select the menu upwards. BAND Button: · In the RF mode, short press the band button to adjust the band in cycles. · In the RF, AV IN, HDMI IN and PLAYBACK modes, long press the button for 3 seconds to adjust the volume downwards. · Press the button in the MENU status to select the menu downwards.