PL310K is professional 3-axis zoom gimbal, with high accuracy encoder FOC solution, mount 10x optical zoom and 4K Full HD camera, providing a detailed long distance zoom aerial shoot, is designed for public security，fire protection, power industry etc. Spec:
- Light: 540g weight
- Small: 137(L) x 90(W) x 135(H)mm
- Power saving: [email protected]
- Unparalleled stabilization: ±0.02°
Pitch: -90°to +90°
Roll: -85°to +85°
Yaw: -150°to +150°smooth rotation
Angular Vibration Range:
- 10x optical zoom
- Sony1/2.3 inch image sensor CMOS with 16000000 Pixel
- Video Resolution: [email protected], [email protected], [email protected], [email protected], Video Format MJPG
- Photo Resolution: 4608*3456 with 16000000 Pixel, Photo Format JPG
- Support 64G SD Card video & photo storage
- Micro HDMI output [email protected]
- Adjustable speed and mode: When zoomed in, with low speed and lock head mode,the control is more accurate; when zoomed out, with high speed and follow mode, the control is more sensitive and quick.
- Onekey reset: The camera can auto return to its original position quickly with one click.
- Support PWM and serial port command control,suitable for close range controller or remote digital gimbal control.
- 10x optical zoom, 4K video steaming, stunning clearly plate within only 200M.
- Ultrafast auto focus, which speed is less than 1s, specially designed for drones.
- Various interfaces, video output, HDMI HD video output,SD card storage for photo、video, PWM control of camera zoom 、auto focus、manual focus、photograph、recording, support serial port control of the camera`s functions,IR controller call camera menu and set the parameters.
PWM control gimbal camera connection manual:
1. 5P gimbal PWM control wire manual:
Connect to receiver stick or three-way switch channel.
1p Dupont green(GND Power the receiver)、black( 5V channel)、red(PITCH 3p Dupont orange( channel):
Connect to receiver stick or three-way switch channel.YAW receiver )
1p Dupont blue( MODE Switch operate mode ):
Connect to receiver rotary knob or non-auto reset THR channel or three-way switch channel, specifics as below:
Switch to low: Gimbal low speed, lock head( When the drone turns, gimbal follows, only controlled by controller);
Switch to middle: Gimbal high speed, follow( Gimbal follows the drone`s direction, and controlled by ground controller)
Switch to high: Gimbal reset, follow( Gimbal return to its original position, and follows the drone`s direction).
2. 7P camera signal and control wire connection manual:
1p Dupont blue(ZOOM Camera zoom control wire,spare wire[Spare usually, if uses, Connect to receiver stick or three-way switch channel.]).
2p Dupont yellow(AV signal output)、green(GND video GND):Connect to AV channel.
1p Dupont green(zoom Auto focus control wire): Connect to receiver stick or three-way switch channel.
1p Dupont yellow(focus Manual focus control wire): Connect to receiver stick or three-way switch channel.
1p Dupont white(pic Switch photo/video mode): Connect to three-way switch channel
Switch from middle to high: Photo or video mode switch
Switch from middle to low:
① Video mode: Screenshot;
② Photo mode: Take photos.
2p Dupont blue(record Start/stop recording), black(GND):Connect to three-way switch channel.
① Video mode, switch from middle to high: Start recording; Switch from middle to low: Stop recording;
② Photo mode, switch from middle to high: Take photos.