Assembled Full Kit 250mm Q250 PRO Carbon Fiber RFT RC Drone Quadcopter Multirotor Packing including : 1 X 250mm 250 PRO Carbon Fiber Mini H FPV Frame Kit 2 X 1806 2400KV Clockwise Brushless Motor 2 X 1806 2400KV Counterclockwise Brushless Motor 4 X EMAX Simon12A Brushless Speed Controller ESC 2 X 6045 Propeller 6*4.5 2-Propeller Props CW/CCW 1 X Straight Pin Flight Control Opensource 1 X Battery 8 ESC Connection Board 1 X RadioLink T6EHP-E 2.4G 6CH Remote Controller Transmitter 1 X 1500mah 2s 7.4v Lipo Battery For All Align Trex T-rex 450 1 X IMAX RC B3 Pro Compact Balance Charger 250mm Q250 PRO Carbon Fiber Mini H FPV Quadcopter Multirotor Frame Kit
250mm Carbon Fiber Mini Quadcopter Multicopter Frame Kit
Arm plate thickness: 4.75mm
Main material: carbon fiber and glass fiber mixed
With rubber damper to decrease vibration during flight.
Aluminum alloy spacer, light weight, reliable.
1806 2400KV CW CCW Brushless Motor KV: 2400 Stator diameter : Φ18 Motor Weight : 16g without cable Supply voltage : 2-3s Maximum current : 6.5A Maximum power : 70W
Emax Brushless Simonk 12A Brushless ESC Speed Controller
12A SimonK Speed Controller Specifications:
– Continuous Current: 12A
– Burst current (10S): 15A
– Li-xx Battery (cell): 2-3
– Dimension (L*W*H): 25mm x 20mm x 7mm
– Weight wires Included: 9
– BEC Mode: Linear
– BEC Output: 1A/5V
– Programmable: Yes
In Simonk program based and optimized to achieve the perfect driving effect
With low voltage protection, over temperature protection, and other functions
on the Power On Self Test
Up to speed: 210000 RPM (2 poles), 70,000 RPM (6 poles), 35000 (12 poles)
MCU and BEC different regulator, independent of each other and improve the
Multiple parameters can be obtained by governor (programming card) or
Throttle range can be configured to be compatible with different receivers,
there is a very good low-speed performance
Built-in linear or switch-mode BEC BEC
6045 Propeller 6*4.5 2-Propeller Props CW/CCW
Weight: about 8g
Straight Pin Flight Control Open source
This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality.
Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size! Description: Item name: CC3D Atom/Mini CC3D/CC3D EVO Size (board only): 30mm x 17mm Size (in case): 22 x 38 x 12mm WxLxH Features: The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. Powerful STM32 32-bit micro-controller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, Mac and Linux. Direct high speed USB support with no drivers required. Spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage. This OpenPilot CC3D Atom board also includes a high quality, protective case. Optional straight and bent pin Battery 8 ESC Connection Board
– Special for MultiCopter battery Connection
– Up to 8 ESC/Motor can be connector to the Board
– 25A maxium input
– Weight:about 7.6 gram
– Size:50mm*50mm 100% brand new
For:UFO KK MK Multicotper, trpcopter xcopter quadcopter Hexcopter Max control 8 pcs ESC with one battery Easy to use, make your aircraft more Beautiful Radiolink T6EHP-E 2.4G 6Ch Transmitter and Receiver
Digital 2.4GHz 6-Channel RC system T6EHP adopted FHSS 2.4GHz technology, it is applied for 3D helicopter. Owing to the most advanced 2.4GHz radio control technology, it is needless to fit crystals for both transmitter and receiver, meanwhile RC system can avoid the interaction problem best up to the advanced code matching mechanism.
Standard Programming Functions :
Model Select six model memory.
Model Type helicopter programming. (for airplane is another version)
Servo Reversing on all six channels.
Dual Rate/Exponential for ailerons, elevator and rudder.
End Point Adjustment fine-tunes servo throws on all six channels.
Digital Trim stores trim settings for each model for aileron, elevator, rudder and throttle.
Fail Safely a safety throttle setting in case of loss of transmitter signal.
Battery Fail Safely moves the throttle to a preset position when the airborne pack reaches 3.8V.
Stick Mode choose from Mode 1 through 4.
Range Checking Power Down reduces transmitter output power for up to one minute, allowing range checking from 50 paces away.
Changeable Throttle Stick select ratchet for airplanes or smooth for helis.
Adjustable Stick Length choose the length that suits your flying style.
Helicopter-Specific Programming Functions:
5-Point Normal and Idle Up Throttle/Pitch Curves.
Throttle Hold for autorotation.
Revo (Revolution Mixing) mixes rudder and pitch together.
Gyro Mixing two gyro gain settings can be programmed and selected during flight.
Swash to Throttle Mixing corrects slowing of the engine\’s speed caused by the swashplate.
Swashplate Types choose from 1S (independent aileron, pitch and elevator servos linked to the swashplate), 3S (120° CCPM), or 3E (90° CCPM).
Swash AFR Adjustable Function Rate, for use with 1S, 3S or 3E swash types
1500mah 2s 7.4v Lipo Battery
Product Description :
Name:1500mah 2s 7.4v Lipo Battery
For:All Align T-rex Trex 450 rc Helicopter
This Li-poly battery features high efficient and high discharge,use a inspection machine to match packs, suitable for All Align trex 450 rc heli and other professional model airplanes, cars, and guns.
Max Continuous Discharge: 10C, Burst Discharge: 15C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can\’t exceed 80% of the max capacity after full charging to ensure a good cycle performance. Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always counttime for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage.
Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35°C in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying,
please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.
IMAX RC B3 Pro Compact Balance Charger Feature: Input Voltage : 100 – 240V AC50 / 60Hz Output Current: 3*800mA Suitable for 2 cell and 3 cell Li-Po Batteries Led Indicator: When power is on : Orange Stand by mode : Green Battery Charging : Red Battery Full : Green