The Best Wishes to Every Clients
Please kindly check your country’s policy about the drones and aircraft, if any problem with the customs, we won’t take any responsibility.
BTW, our price not include any tax fees, paying tax is citizens’ obligations.
To our dearest Russian clients,
Please notice SPSR express can not ship any parcel with battery, if you need Battery , please choice RETS-express, if no message or request, we will just ship by RETS express instead of SPSR.
Besides, aliexpress shows SPSR’s 7-14 days delivery means to Moscow and Saint Petersburg,not include any other region.
If you have problem with that, please contact me freely or contact the aliexpress service for details.
Welcome Retail and Wholesale.Any question or quotation,please feel free to message us.Your satisfaction is our top priority
Please take the “Delay Problem of Logistic” into account before purchase.And Clients need to get a plan of “Waiting Preparing”,Please do not leave negative feedback or make claim without contact.
Aliexpress Approved Shipment–China Post Ordinary Small Packet Plus
(in Selling Peak Season,We guarantee 45 days delivery to main countries ;55 days to Russia; 90 days to Brazil!)
JMT 2.4G 9CH 1000mm Carbon Octocopter Pixhawk M8N GPS 8-Axle RC Drone Unassembled DIY ARF Kit No Battery FPV Upgrade Product is DIY Version, Unassembled Kit and NO Manual, Please take it into account before ordering. Our technicist will help client to weld the some wiring for ESC and we will test all electronic parts before shipment. If any Technical questions, Please message us but do not open dispute or leave negative feedback.
1x Tarot IRON MAN 1000mm 8 Aix Carbon Fiber Octocopter TL100B01
8x JMT 350KV Brushless Disk Motor high Thrust With Mount
8x JMT 40A Brushless ESC Speed Controller
1x Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD
4x Three-hole High Quality Carbon Fiber 15×5.5 1555 Propeller CW CCW(Pair)
1x Mini M8N GPS Module NEO-M8N GPS
1x Multifunction Power Distribution Board 5.3V BEC
1x CNC GPS Anti-interference Antenna Mount Holder Stent Case
1x Radiolink AT9 2.4GHz 9 Channel Transmitter with Radio R9D Receiver
1x Tool Set (Bag)
· Carbon content 100% TORAY 3K carbon fiber applied, CNC processed
· The quality of 2.0mm thick matte carbon fiber is higher than products available on market.
· Motor mount is 6061T6 aluminum alloy CNC processed
· Lightweight design, and dual-color, which can be recognized easily in the air
· The whole set is only 1.6 kg weight (lading skid included)
· Payload is up to 8 kg, which is specific for 5DII, RED EPIC, C300, FS100, FS700 and large-sized photographic equipments
· Boom diameter: 25MM
· Diameter (motor to motor): 1020MM
· Frame diameter: 1070MM
· Height: 380MM
· Central plate: 250×240 MM
· Motor installation space: 16MM/19MM/25MM/27MM equilateral triangle installation
9 Channel 2.4G Remote Controller:
MOST COMPLETED FUNCTION, SUPPORT USB ONLINE UPDATED AND S-BUS, VIBRATION ALARM, DATA TELEMETRY AND UNBELIEVABLE PRICE
“AIRCRAFE” model type added
Programmable mix control
2.8 inches LCD
3ms quick response
Chinese & English menu
Great performance in anti-interference
Nine channel with full function
Support USB online updated
– The board integrates with PX4FMU+PX4IO
– Pixhawk is with new 32 bit chip and sensor technology
– Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;
– 14* PWM/ actuator output;
– Bus interface (UART, I2C, SPI, CAN);
– Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;
– Provide automatic and manual mode;
– Provide redundant power input and fault transfer function;
– Color LED lamp;
– Multi tone buzzer interface;
– Micro SD to record flight data;
– 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit
– Main frequency: 256K, 168MHZ RAM
– 32 bit STM32F103 backup co processor
– L3GD20 3 axis digital 16 bit gyroscope
– LSM303D 3 axis 14 bit accelerometer /magnetometer
– MPU6000 6 axis accelerometer / magnetometer
– MS5611 high precision barometer
– 5* UART, 1*compatible high voltage, 2*hardware flow control
– 2* CAN
– DSM/DSM2/DSM-X satellite receiver compatible input
– Futaba SBUS compatible input and output
– PPM signal input
– RSSI (PWM or voltage) input
– 3.3 and 6.6VADC input
– External USB MICRO interface
Caution for the battery:
Don’t over-charge, or over-discharge batteries.
Don’t put it beside the high temperature condition.
Don’t throw it into fire.
Don’t throw it into water.