GT550 FBL Helicopter Torque Tube Version Super Combo Fits Align Trex 550 Helicopter
Finally, a 550 class flybarless helicopter kit that won’t break the bank! Modeled on the famous and proven T-Rex 550, the GT550 FBL TT will push your 3D skills to their limits.
This 550 size helicopter offers an excellent power-to-weight ratio that makes for stellar 3D performance. It utilizes the same power system as a 600/.50 size electric heli, but is lighter and spinning smaller blades, thus offering much higher performance and efficiency. Also featuring a flybarless rotor head and torque-tube driven tail, this machine is capable of handling whatever hardcore aerobatics you choose to throw at it!
With its black anodized CNC alloy head & tail unit and beautifully finished carbon fiber frame, the GT550TT FBL is as nice to look at as it is to fly. This kit has just about all the alloy upgrade parts you could want already installed such as battery mount plate, tail servo mount, tail pushrod guides, anti-rotation bracket base and main bearing blocks. There are very few plastic parts anywhere on this heli!
The GT550 FBL TT uses high quality tail bearings and tight tolerances to ensure no slop in the tail assembly and locked-in tail performance for the most extreme of 3D flying.
This heli comes 90% pre-assembled so you can be in the air in no time. Just complete the final assembly, add your favorite main blades, install your own electronics and your ready to fly!
1 X 550 FBLTT RC Helicopter: Length: 1042mm Height: 374mm Main Rotor Diameter: 1188mm Tail Rotor Diameter: 254mm Motor Drive Gear: 16T Main Drive Gear: 170T Autorotation Tail Drive Gear: 180T Tail Drive Gear: 40T Drive Gear Ratio: 1:10.62:4.5 Weight (w/o electronics/blades): 1350g 1 X Yellow KBar Gyro:
*BluEasy Start setup via PC or Control Panel
* Programming Assistant (Setup Wizard):gets you ready for flight in 11 steps
* Fine adjustments can be done at the field in yourtransmitter (no PC necessary)
* Ready for online updates as they become available.
* 5.3.4PRO latest software version.
* Support satellite.
* Supporting 3Pcs servo cable.
* You can set it via computer or with Android phones via bluetooth.
* You have the latest version, the factory closed online update feature due to the copyright issues , do not upgrade by yourself..
* Size(L*W*H) : 30 x 38x 13mm
* Weight : about 12g
1 X 1220kv motor for 550 RC heli : Kv:1220KV Max current:95Amps Max Power:2100watts Idle current:4.0Amps Resistance:0.015 Shaft:6mm Weight:380g Suggested ESC: 100A Cell count: 3-6s Lipoly (Voltage) Bolt holes spacing:25/30mm & mm Bolt thread: M3 Connection: 4.0mm Bullet-connector 3 X KST 725MG SWASH PLATE SERVO FOR RC HELI: Operating Voltage:DC6.0V-8.4V
18Kg.cm at 8.4V
13Kg.cm at 6.0V
0.07sec/60° at 8.4V
0.09sec/60° at 6.0V
Working Frequence: 1520us/333Hz, 900us-2100us
Ball Bearing: 2BB 1 X KST 525MG TAIL SERVO FOR RC HELI: DS525MGSTD SERVO
For tail lock Operating Voltage:DC6.0V-8.4V
7.0Kg.cm at 8.4V
6.0Kg.cm at 7.4V
5.0Kg.cm at 6.0V
0.04sec/60° at 8.4V
0.045sec/60° at 7.4V
0.05sec/60° at 6.0V
Working Frequence: 760us
Motor: Φ17mm Coreless
Ball Bearing: 2BB 1 X YPG 100A ESC: Max Cont Current: 100A Max Burst Current: 120A for 10 seconds Input Voltage: 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery BEC: 5.5V/6A Switching BEC PWM: 8~16 KHz Max RPM: 240,000rpm for 2 Poles Brushless Motor PCB Size: 50x30mm Weight: 81g (including wires) 1xYPG programming card
• Active free-wheeling circuit mode: Freew. off/Freew. on
• Govenor mode: Gov. off/Gov. store/Gov./fast Gov.
• Govenor mode P-gain: 0.7/0.9/1.2/1.4/1.6/1.9
• Govenor mode I-gain: 0.02/0.03/0.05/0.06/0.08/0.09
• Startup speed: Heli slow/Heli middle/Heli fast/Plane slow/Plane middle/Plane fast
• PWM frequency: 8kHz/9kHz/10kHz/12kHz/14kHz/16kHz
• Start-up power: Auto 1~32%/2%/4%/8%/16%/32%
• Motor timing: 0°/6°/12°/18°/24°/30°
• Brake: off/Acro/Acro hard/smooth/middle/hard
• Cut-off type: off/slow down/cut-off/NiMh/LiFe/LiPo
• Cut-off voltage (LiFe mode): 2.2/2.3/2.4/2.5/2.6/2.7
• Cut-off voltage (LiPo mode): 2.9/3.0/3.1/3.2/3.3/3.4
• Cells: 4/5/6/7/8/9
• Cells: 10/11/12/13/14/15
• Special functions: Beep short/Rev./Stop/Full speed/F3A brake/Auto timing
*Note: This programming card only works with the YPG ESCs (45A/80A/100A/120A HV)
Includes: 1 X 550 FBL TT RC Helicopter kit(the main blade is not included) 1 X Yellow KBar Gyro 3 X KST 725MG SWASH PLATE SERVO 1 X KST 525MG TAIL SERVO 1 X YPG 100A ESC 1 X 1220kv motor 1xYPG Programming card