DIY Set PIX PIX4 Flight Control ZD850 Frame Kit M8N GPS Remote Control Radio Telemetry ESC Motor Props for RC 6-Axle Airplane
Note : Product is DIY Version, Unassembled Kit and NO Manual, Please take it into account before ordering. Our technicist will help client to weld the some wiring for ESC and we will test all electronic parts before shipment. If any Technical questions, Please message us but do not open dispute or leave negative feedback. Note: The item do not include Battery!
Product Listing :
1.ZD850 Full Carbon Fiber Frame Kit with Unflodable Landing Gear Foldable Arm *1
2.Tarot 4006 620KV Multiaxial Brushless Motor TL68P02 *6
3.Hobbywing XRotor 2-6S Lipo 40A Brushless ESC *6
4.5 in 1 Shock Absorber Damping Plate Integrated Power Module *1
5.Three-hole High Quality Carbon Fiber1555 CW CCW Propellers *3 Pairs
6.Pixhawk PX4 Autopilot PIX 2.4.8 Flight Controller 32 Bit ARM *1
7.Mini M8N GPS Module NEO-M8N GPS *1
8. CNC GPS Anti-interference Antenna Mount Holder Stent Case *1
9.Wireless WIFI Radio Telemetry Replace Traditional 3DR Telemetry for Mobile Phone Computer *1
10. RadioLink AT10 II 2.4Ghz 10CH with R12DS Receiver RC Transmitter *1
11.1m Black and Red 16AWG Silicon Wire Connecting Wire *3
12. 4X Hook & Loop Fastening Tape *1
13.XT60 Male with 14AWG Wire 10cm *1
——-PIXHAWK PIX PIX4 Flight Control ——–
1. Advanced 32-bit ARM CortexM4 high-performance processor, can run NuttX RTOS real-time operating system; 2.14 PWM / servo output; 3. Bus interface (UART, I2C, SPI, CAN); 4. Integrated backup power and failed backup controller, the main controller fails to switch to the backup control; 5. Provide automatic and manual mode; 6. Provide redundant power input and failover function; 7. Multi-color LED lights; 8. Provide multi-tone buzzer interface; 9. Micro SD records flight data; Hardware parameters: processor 1.32 bit 2M flash memory STM32F427 Cortex M4 with hardware floating point processing unit 2. Frequency: 168MHZ, 256K RAM 3.32 bit STM32F103 backup coprocessor sensor 1.L3GD20 3-axis digital 16-bit gyroscope 2. LSM303D 3-axis 14-bit acceleration / magnetometer 3.MPU6000 6-axis accelerometer / magnetometer 4.MS5611 high-precision barometer interface 1.5 UART 1 compatible high voltage, 2 with hardware flow control 2.2 CAN 3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input 4.Futaba SBUS compatible input and output 5.PPM signal input 6.RSSI (PWM or voltage) input 7.I2C 8.SPI 9.3.3 and 6.6VADC inputs 10. External MICRO USB interface
——ZD850 Frame Kit ———
Arm with upturned 5 ° force to play to the extreme, larger diameter 20mm carbon tube.
Aluminum Folding, Nylon Clamp (Tightened Clamp) 8 hole motor mount, compatible with more motors.
Motor Block Diagonal wheelbase of about 850mm, maximum support 16-inch paddle.
Center plate size 245mm * 180mm more space, the middle plate height of about 35mm.
Hook head with 10 * 330mm long carbon tube, can be free to stretch the length you want, with the porous bit PTZ board.
Tripod with a diameter of 16mm carbon tube, height 350mm, tripod crossbar 500mm, more stable grounding area.
Tripod with double-tube carbon fiber as support, bear the force of more than 50kg.
20mm carbon tube arm
16mm + 10mm carbon tube tripod
3.0 mm botton center plate
1.5mm upper center plate
Aluminum alloy folding pieces
Nylon mixed carbon pipe clamp
Plastic tripod connection (force 50kg)
The net weight of frame kit is about 1210g
————–Hobbywing 40A Motor ————–
Features: 1.1 Rotor dedicated program, fast throttle response, beyond the various types of open source software; 1.2 Specifically optimized firmware disc motor, the motor has a very good compatibility; 1.3 Highly intelligent, adaptive ability, extremely easy to use; 1.4 Throttle signal line is a twisted pair, copper wire to reduce crosstalk signal generated within the transmission, so that more stable flight; 1.5 Supports up to 621Hz refresh rates up to the throttle signal, compatible with a variety of flight control (Note: More than 500Hz signal of the throttle throttle are all non-standard signal) 1.6 Use MOSFET special driver chip, performance and stability far beyond the driving circuit with discrete components built 1.7 Ultra-low resistance MOSFET, strong resistance to current capacity; 1.8 Exquisite plastic case back with high brightness LED navigation lights 1.9 Power transfer comes on the back of the micro DIP switch for setting LED navigation lights on / off, LED light color, into the steering angle and the motor. ———-Radiolink 2.4G 10CH Remote Control ——— Features:
Multiple function remote control system,including helicopter,airplane and slider three type flying machine and five models,cover almost every popular model,you can fly any model by this radio.
3.5 inch colorful screen 320×480 resolution,clear display menu and graphs.
Great control distance: 1.1km on the ground,2km in the sky.
Expansion feedback module,users can get plane details in real time.
Make very setting clear and exactly output result.
Fast response time only 3ms to the operation,faster then the other transmitter 20ms,even ten channels also let you feel it.
High channel resolution reaches 4096,0.25us per resolution let all the servos keep tranquil.
Strong anti-jumping,DSSS(Direct sequence spread spectrum) technology.
Unbelievable price, high quality as supper bland, and more exactly, faster response, higher resolution,one and the only one anti-jumping DSSS technology.really worthy to have it.