DIY RC Drone Quadrocopter ARF X4M360L Frame Kit with QQ Super flight control Motor ESC flysky 2.4G FS-i6 Transmitter 11.1V 3300Mah 25C Battery Unassembled,buyer need to assemble by themselves. Package include: 1xX4M360L frame 2x920KV CW Brushless Motor 2x920KV CCW Brushless Motor 4x30A Brushless ESC 2X8443 8.4*4.3″ Carbon Fiber Propeller Self-locking Props 1XMK KK Multi-Copter Power Battery to 8 ESC Connection Board 1XQQ Super Flight control 12×3.5mm banana plug 1xDeans Style T Plug Male Connector Silicone Wire With 11.5CM 14awg 1xHook and & Loop Fastening Tape 1XFlysky FS-i6 6CH 2.4G AFHDS 2A LCD Transmitter iA6 Receiver 1X11.1V 3300Mah 25C Battery 1x IMAX RC B3 Pro Compact Balance Charger Multi-rotor flight control Built-in three-axis gyroscope and three-axis acceleration sensor, support for self-stabilizing, super stable flight performance Support the general receiver, FUTABA S.BUS receiver, DSM2, 11MS, 22MS receiver, simplifying connection installation more convenient, ultra-bright LED Product Specifications: Processor:32BIT ARM Voltage:3.6V-8.4V Current:60mA* Output rate:360Hz Dimension(L-W-H):43X29X13MM Weight:13g Not include receiver and satelite Reliable, interference free 2.4GHz AFHDS 2A signal operation. 6CH operation. Use only 4 * AA batteries for transmitter. Quick and extremely stable in performance. Simple binding procedure. Highlights: Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.Silm design on transmitter for easy handling! This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety. This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption. AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs. AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance. ransmitter Specfications: Channels: 6 Model type: fixed-wing/glider/helicopter RF range: 2.405-2.475GHz Bandwidth: 500KHz Band: 142 RF power: less than 20dBm 2.4G system: AFHDS 2A and AFHDS Code type: GFSK Sensitivity: 1024 Low voltage warning: less than 4.2V DSC port: PS2; output: PPM Charger port: no ANT length: 26mm * 2(dual antenna) Power: 6V 1.5AA * 4 (Not included) Display mode: Transflective STN positive type, 128 * 64 dot matrix VA72 * 39mm, white backlight. Size:174 * 89 * 190mm Weight: 392g Online update: yes Color: black Receiver Specifications: Channels: 6 Channels Model type: Airplane / Glider / Helicopter Frequency range: 2.4–2.48GHZ Band width number: 140 Transmitting power: not moer than 20dBm RX sensitivity: -105dBm 2.4G system: AFHDS 2A Code type: GFSK Antenna length: 26mm Input power: 4.0-6.5V DC Dimension: 40 * 21 * 7mm Weight: 6.4g Color: Black i-Bus interface: No Data acquisition interface: No Package information: Package size: 23 * 21 * 10.5cm / 9.1 * 8.3 * 4.1in Package weight: 680g / 1.5lb
Thank you for you choose our product , we are trustworthy ,if you have any questions ,please message us freely , we would like to try our best to solve your issue .