We accept OEM orders,if you have special request for the item or other items you need to produce,please feel free to contact us,we will try our best to give you best quotation and serves~~~
DIY FPV Drone Racer 250 ARF Racing Quadrocopter Raptor S-Tower F3 FC Built in 5.8G Transmitter OSD Flysky FS-i6 With HD Camera
Materials: Glass Fiber Fasteners: Stainless Steel & Red Metal 8/8 Size: 220mm diagonally, 175mm wide, 130mm long motor-to-motor; about 1/2 the size of a regular quadcopter Maximum Propeller: 5″ Motor Mount: M2 12mm – 16mm (Tiger MN1806 2300kv, RCX 1804 2400kv), M3 19mm (Tiger MT2206 2000kv, Sunnysky X2204 2300kv) Flight Controller Mount: 30.5mm x 30.5mm Board Camera Mount: 32mm x 32mm
Support voltage: 2-4s lipo
Instantaneous current for 10 seconds:40A
Connector:5V/1A 12V/500mah and so on.
|Flysky FS-i6 with FS-iA6B Receiver 2.4G 6ch Transmitter:|
The Flysky FS-i6 is a affordable, 6CH 2.4G radio system and also a very simple setup for your RC vehicle. The automatic frequency hopping digital system provides a strong, reliable 2.4GHz signal, so rest assured you\’ll always be in control. Included in the package is a 6-channel mini receiver that will fit in most vehicles. The ergonomic feel of the trasnsmitter will feel good in your hands even after long track sessions.
Reliable, interference free 2.4GHz AFHDS 2A signal operation.
Use only 4 * AA batteries for transmitter.
Quick and extremely stable in performance.
Simple binding procedure.
Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.Silm design on transmitter for easy handling!
This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission
Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.
This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.
AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs.
AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance.
1* Glass Fiber Mini Alien Across 250mm 250 RC Quadcopter Frame
4* MT2204 2300KV Motor ( 2 CW and 2 CCW)
1* XT-XINTE Universal Motor Cover Protection set
10* Kingkong 5045 5×4.5×3 3-Blade CW CCW Clear green Propellers
1* Raptor S-Tower 30A 4 in 1 ESC 2-4 S Support Dshot600 + F3 flight Controller + OSD
1* 700TVL CCD FPV HD Camera 2.8mm Lens with 1/3″ 960H Exview HAD CCD II
4* RGB 5050 LED Light Board 5V 3S 4S 7 Colors Switch
1* Flysky FS-I6 transmitter and FS-IA6B receiver
1* JMT 11.1V 2200 MAH 25C/20C lipo battery
1* 1S-8S Low Voltage Buzzer
1* B3PRO charger
1* 5.8G mushroom antenna receiver
1* FPV 5.8GHz 600mW 32 Channels Mini Wireless A/V TX Module TS5828
1* Boscam Galaxy D2 7 inch FPV Monitor
1* Tool bag