DIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RXDIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RXDIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RXDIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RXDIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RXDIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RXDIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RXDIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RXDIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RX

DIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RX

0% of buyers enjoyed this product! 0 orders
List price:
US $289.46
Price:
US $263.41

Product Description

Make a DIY drone by yourself becomes easy and interesting

Join us to start building a Quadcopter.

Please pay attention that this drone Kit set does not include battery,you can use your own,if you do not have that ,please contact us to recommend for you,thanks

DIY FPV Drone Kit Welded S600 4 axis Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor FS-I6 TX RX

Use Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD and 7M GPS

– The board integrates with PX4FMU+PX4IO – Pixhawk is with new 32 bit chip and sensor technology Features: – Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system; – 14* PWM/ actuator output; – Bus interface (UART, I2C, SPI, CAN); – Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control; – Provide automatic and manual mode; – Provide redundant power input and fault transfer function; – Color LED lamp; – Multi tone buzzer interface; – Micro SD to record flight data; Processor: – 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit – Main frequency: 256K, 168MHZ RAM – 32 bit STM32F103 backup co processor Sensor: – L3GD20 3 axis digital 16 bit gyroscope – LSM303D 3 axis 14 bit accelerometer /magnetometer – MPU6000 6 axis accelerometer / magnetometer – MS5611 high precision barometer Interface: – 5* UART, 1*compatible high voltage, 2*hardware flow control – 2* CAN – DSM/DSM2/DSM-X satellite receiver compatible input – Futaba SBUS compatible input and output – PPM signal input – RSSI (PWM or voltage) input – I2C – SPI – 3.3 and 6.6VADC input – External USB MICRO interface All motors and ESC has been Welded before shipping,what you need to do is assemble it and fly

S600 Super Hard Arm 4-Axis Rack Quadcopter Frame Kit with Landing Gear Skid makes your DIY Drone looks cool and strong Wheelbase: 600mm two optional Tripod height: 250mm Maximum available paddle:

S600 / 15 inch

Weight: S600 / 860g Upper and lower center plate middle height: S600 / 36mm

Flysky FS-i6 6CH 2.4G AFHDS 2A LCD Transmitter iA6 Receiver Mode 2/1 Radio System

Transmitter Specfications:
Channels: 6
Model type: fixed-wing/glider/helicopter
RF range: 2.405-2.475GHz
Bandwidth: 500KHz
Band: 142
RF power: less than 20dBm
2.4G system: AFHDS 2A and AFHDS
Code type: GFSK
Sensitivity: 1024
Low voltage warning: less than 4.2V
DSC port: PS2; output: PPM
Charger port: no
ANT length: 26mm * 2(dual antenna)
Power: 6V 1.5AA * 4 (Not included)
Display mode: Transflective STN positive type,
128 * 64 dot matrix VA72 * 39mm, white backlight.
Size:174 * 89 * 190mm
Weight: 392g
Online update: yes
Color: black

Receiver Specifications:
Channels: 6 Channels
Model type: Airplane / Glider / Helicopter
Frequency range: 2.4–2.48GHZ
Band width number: 140
Transmitting power: not moer than 20dBm
RX sensitivity: -105dBm
2.4G system: AFHDS 2A
Code type: GFSK
Antenna length: 26mm
Input power: 4.0-6.5V DC
Dimension: 40 * 21 * 7mm
Weight: 6.4g
Color: Black
i-Bus interface: No
Data acquisition interface: No

Package information:
Package size: 23 * 21 * 10.5cm / 9.1 * 8.3 * 4.1in
Package weight: 680g / 1.5lb

Packaging Details

Unit Type: 
 piece
Our store ships to more than 200 countries and you can enjoy free shipping on all items sold on headphones.shopping
Estimated Delivery Time is 7-30 business.

Note: The delivery time mentioned above does not include order processing time that usually varies from 1 to 3 days.
Different items have their own processing time, which is what we cannot control. But what we can do is try the best to let you receive your items as soon as possible.

The following cases should be taken into consideration regarding shipping times:
  • Weight and dimensions of a package
  • Place of Dispatch
  • Destination
  • Freight
Average Star Rating:
0 out of 5 ( 0 Ratings)

Feedback Rating for This Product

Positive (0%) 5 Stars (0)
4 Stars (0)
Neutral (0%) 3 Stars (0)
Neutral (0%) 2 Stars (0)
1 Stars (0)