DIY Drone FPV Set with 1000mw Transmitter 7 Inch FPV Monitor Feiyu G3 3-axis Gimbal Gitup git2 Camera FPV Cable Panel Antenna
1xGitup git2 Camera
1x Feiyu G3 Mini 3D 3 Axis Brushless Gimbal
1xReal-time FPV Cable
1x Tarot TL300N4 5.8G 32CH 1000mW Transmitter
1xBoscam FPV Monitor
High end FPV Set for DIY RC Drones
Real-time Video Output Cable FPV Image Transmission Line AV Video Cable
Black is negative
White is an AV signal line
Red is 5V
5.8G 14dBi High Gain Panel Antenna w/Angle RX-SMA Female Antenna Gains for FPV
1.A brand new design, 5.8 G Antenna gains for FPV aerial photo.
2.Effectively expand the launch distance and angle.
3.The blue part can bend.
5.L shape with inner bore
1.Specially designed for RC FPV, mini size, high gain, low SWR and high self recovery function at any angle.
2.Transmitting distance: 15km with 5.8G 1200mw VTX/RX.
3.5km with 5.8G 600mw VTX/RX.
4.Frequency: 5600-5950 MHz
6.3db vertical beam width: 40 degree
7.3db Horizontal Beam width: 35degree
8.Impedance: 50 ohm
12.Maximum Power: 50W
16.High self recovery function.
Total weight: 100g
Feiyu G3 Mini 3D 3 Axis Brushless Gimbal Stabilizers Steady
1.Mini 3D 3-Axis Brushless Gimbal (for Aircraft) Suitable for Gopro4,Gopro3+,Gopro3 or Cameras with Similar Size. Can Be Easily Mounted In Fixed Wing, Multirotor, Helicopter for Aerial Photography
2. No need to debug, when connect the power supply it will be able to work independently.
3. You Can Assemble The Gimbal Properly According to The Drawing, Then Install The Video Camera On It. There is No Need to Set Up and Adjust The Parameter. for The First Use, Power On The Gimbal, and Then Keep It Static for a While,After Its Reset, The Gimbal Will Be In a Level Position Automatically. Then You Can Use It Normally.
4. Built-In Wiring Unbound Design
5. One Key Start Function, Power Then Fly and without Tedious Debugging Needing.
3 Working Modes:
Heading Follow Mode
Camera Pitch and Roll Angles Remain Constant, Heading Follows The Nose Position,Pitch Can Be Control By Rc .
Heading and Pitch Follow Mode
Camera Roll Angle Remains Constant. Heading Follow The Nose Position and Pitch Follow The Elevation of The Aircraft.
Heading Lock Mode
Heading, Pitch and Roll Are All Locked to Point At One Position.
Heading and Pitch Can Be Control By RC .
Initialize The Gimbal:
Keep The Gimbal Motionless, Then Power On, Hold The Gimbal Steady and It Will Initialize Automatically.
Once Complete The Camera Will Be Level With The Horizon In Pitch and Roll Angles and It Will Be In Heading Follow Mode.
In Addition To Initial Power On, The Gimbal Needs to Be Initialized Whenever The Following Situations Appear:
1. After Power On, The Angle of Pitch is Not Level with The Horizon Line.
2. After Power On, The Angle of Roll is Not Parallel with The Horizon Line.
3. When The Gimbal is In Heading Lock, The Angle of Heading Moves Frequently (Heading is Not Stationary)
Tarot TL300N4 5.8G 32CH 1000mW Wireless AV Transmitter with Aluminum Case + Mushroom Antenna Sender Set
-Weight: 30.9G (without antenna)
-Working Frequency: 5645-5945MHz
-Channel: 4 bands / 32 channel
-Output Power: 30.5dbm (1000mw)
-Input Voltage: DC 7-26V (2-6S)
-Output Voltage: 5V 1A
-Antenna Adaptor: RP-SMA 50 ohm
-Working Temperature: -10 ~ 60 degrees.
-FM Frequency: FM
Boscam Galaxy D2 7in FPV Monitor/ Display Built-in 5.8G 32CH Dual Receiver with Holders, 4000mAh Battery and Sun Hood
Screen size: 7 inch Screen type: TFT LCD screen/long life, LED backlight Resolution: 800*480 Brightness: 400cd/m2 Contrast: 500:1 View angle: 140/120 degree (Horizontal/Vertical) Working Voltage: 7-24V Power consumption: <4w Size: 176*112*23mm Working Temp: -10-60 degree Celsius Build-in 5.8G Dual diversity receiver automatically for best resolution Built-in 3CH 5.8G AV output and 1CH AV input Built-in 3.7V 4000mAh battery Features: Integrated automatically scanning channel function, a key to search signal, easy to operate; Built-in 32CH Dual receiver, dual diversity reception, two receiver modules receives signal independently by different channels. Built-in 3CH 5.8G AV output (R1, R2 and Diversity) and 1CH AV input. Built-in 3.7V 4000mAh battery makes you work for more than 3 hours, when it is fully charged. With two holders (control holder and Triangle holder), the control holder can work with radio with mental handle (plastic handle isn’t supported temporarily) Special BOSCAM holder structure, it is quick and easy to be installed on the radio (about 10s), especially for DJI Phantom radio. You can adjust the position of monitor on the radio with the universal ball and adjustment shaft. The equipped charger wire can connect with 3S battery as external power supply, so that you will not worry about the end of built-in power consumption in outside. A foldable sun hood is included to optimize viewing in bright conditions.
GitUp Git2 Action Camera 1080P 60fps 2K Recording 16MP CMOS Sensor WIFI HD Sport FPV Camera
Fully-loaded gitup git2 action camera
Capturing 1080p 60fps smooth video,taking 16MP photo,supporting external mic,wrist watch remote,G-sensor,quick Capture,remote shutter,git2 is a powerful and fully-loaded camera!
Full HD 1080P 60fps & 2K recording
16MP CMOS Sensor
1.5″ Color Ultra HD LCD Screen
7 Elements f/2.8 Ultra Wide Angle Lens
Advanced Settings(ISO/EV/White Balance/Shutter Speed)
Gyro Image Stabilization
Wrist Watch Remote
Quick Start Recording
Remote Shutter for FPV
Powerful Lithium-ion Battery:950mAh /Max 120mins