All the products of our company accept retail, wholesale, custom, labeling, if there is any demand,please contact us freely. If any questions, Please message us but do not open dispute or leave negative feedback.Thanks !
BS430 ESC 30A 3-6S 4 in 1 BLHeli-S firmware Dshot 4x30A Omnibus F3 F4 Fly-tower Speed Controller for FPV Camera Drone Quadcopter
BS430 Blheli_s 3-6S 4in1 ESC 4x30A OmnibusF3 F4 Fly-tower
The BS430 4in1 ESC 4x30A Race Version runs the newest BLHELI_S firmware, supports Dshot/Multishot/Oneshot42/Oneshot125, it offer the best performance in 35x35mm size.integrated. Current and voltage sensor
Works up to 30A each motor.
BB21 MCU, 48Mhz Runs BLHELI_S J_H_xx firmware
Supports 3-6S lipo input
Con. Current: 30A
Peak Current: 35A (10S)
Current and Voltage sensor
5V 3A BEC
Only 36x36mm, mount holes 30.5×30.5mm M3
NO External capacitors needed
Compatible for Omnibus F3 F4, easy to assembly a Fly-tower with it
-BLHeli_S is designed for superior performance in FPV Racing, and uses hardware generated motor pwm for smooth throttle response and silent operation.
-The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us) and D-shot .
– The input signal is automatically detected by the ESC upon power up.
– All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling
– The code supports features to prevent sync loss. There are tune-able parameters that can make the code run well even in the most demanding situations, although default settings will work
– excellently in normal operating environments
– The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
BS430 ESC x 1
Cable x 2
M3 Nylon screws x 4
M3 Nylon column x8
M3 Nylon nut x 4