Mini Pixracer Autopilot Xracer FMU V4 PX4 Flight Controller + M8N GPS for FPV Multicopter-Black
The new Pixracer (formerly called XRacer) is available now and its fully supported by the Arducopter and PX4 community. Its a genuine open source project, already running with PX 4 stack software / QGroundControl (QGC), as well with Arducopter / Planner (MP).
This is not just another small Pixhawk knock off or derivate, the Pixracer is the first autopilot of the new FMUv4 Pixhawk generation. Its coming with an upgraded Invensense Sensor generation (bye bye tricky LSM 303), a plug in Wifi board and last not least with a 2MB Flash : A real upgrade compared to former versions.
Pixracer specifications :
– MCU – STM32F427VIT6 rev.3
– PCB dimension 36mm*36mm
– FRAM – FM25V02-G
– LDO Ultra low noise LDOs for sensors and FMU
– MPU9250 , ICM20608 , baro MS5611, mag HMC5983
– Connectors – GPS+I2C, RC-IN, PPM-IN, RSSI, SBus-IN, -IN, USART3 ( TxD, RxD, CTS, RTS ),
USART2 ( TxD, RxD, CTS, RTS ), FRSky-IN, FRSky-OUT, CAN, USART8 ( TxD, RxD ), ESP8266 ( full set ),
SERVO1-SERVO6, USART7 ( TxD, RxD ), JTAG ( SWDIO, SWCLK ), POWER-BRICK ( VDD, Voltage, Current, GND ), – BUZZER-LED_BUTTON
– MicroSD card reader
– RGB LED
– Micro USB
– WiFi ESP8266 802.11bgn ( Included !)
– This popular add on is a very versatile solution, you might want to check its wiki as well: Click But donâ€²t worry, the included WiFi Module is coming ready to go !
– JST GH series connectors for easy and robust peripheral connections, DF13 haters will love those !
– Dimensions – 36 x 36mm with 30.5 x 30.5mm hole grid with 3.2mm holes
– Weight Pixracer – ( include SD and CNC protective case ) 26g
– 5 kinds of professional flexible silicone cables for almost any peripheral module included.
– Power supply – 5-5.5VDC from USB or Power Brick connector.
– With M8N GPS for Pixraer
– Color: Black
Package included :
– 1x Pixracer V1.0 Flight Controller
– 1x CNC Case
– 1 x safety switch + buzzer
– 1x Power Module Cable
– 1x Serial Cable
– 1 x I2C Cable
– 1 x Receiver Cable
– 1 x WiFi ESP8266 Module
– 1x Micro SD Card + Reader
– 1x M8N GPS
1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW. 2) We will process most order in 48 hours after payment verification and offer tracking no with every Deal(aliexpress only can fill the tracking No after 24 hours). 3) Support WORLDWIDE SHIPPING. (Except some countries and APO/FPO). 4) DHL/Fedex Tracking No Maybe Change after the item arrive Hongkong(eg.we shipped the item on Friday and fill the tracking No,but the tracking No may be Change on Monday if the Parcel arrive Hongkong). 5) SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. 6) If you have not received your shipment within reasonable days from payment, please contact us first(pls don’t put negative feedback before contact us!). We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1) We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important ,We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. 2) It is impossible to address issues if we do not know about them!
1) For Russian buyer,pls offer full name as policy requires. 2) For Buyer from Russian Federation,Argentina,Ukraine,Item may ship via EMS if you choose DHL/Fedex as complex customs declaration process. 3) For Buyer From Brazil,pls offer Tax No is you want to ship via DHL/Fedex,or item will ship via EMS though you choose DHL.