Auto air lock 13 inches LY 888D OCA lamination machine non-bolts all in one free tax to EU
Thank you for using our products. For the safe of use of this new product, before operating this unit, please read these instructions completely and save this manual for future use. Please do not attempt to disassemble or modified the machine!
Usually our products can reach gold pressure value 6.8kg, that can be non bubble, oca attached super well effect!
This is a newest upgraded 13 inch laminating debubbler in one machine, use hard to hard laminating working type, built-in air compressor and vacuum pump, with new auto air lock function, don’t need to fix or tighten screws on the top cover. Laminating and bubble remove only one step ,100% no bubbles.
1. Plug in power line ,turn on the power switch .
2. Adjust laminating pressure to 0.5Mpa.
3. Touch system start , click “setting”.
4. set the “vacuum time” to 15S,”laminating time” 25S,”Debubble time” 5-10M,”Laminating debubble temp”40degree,Click”comfirm”,Click”automatic” preheat.
5. Open the machine cover lid , tear off the oca protect film.
6. Put the glass on lcd, then use one finger click the middle screen softly.
7. Put it to laminating area in order, close cover
8. Click “start “,vacuum air-removed start.
9. It will turn to bubble remove mode after 25 seconds automatically, it will automatic exhaust after debubble .
10. Take out the screen.
SUPPLY: AC220V AC110V
WEIGHT: Near 40KG